Skip to main content

Buyer's Guide

What's Included in a Forklift Refurbishment? Inside the Forklift Refurbishment Process

By LiftWorks USA | Updated November 2026 | 11 min read

In a real forklift refurbishment process, the machine is torn down, inspected, rebuilt with new parts, and load-tested, with every step documented. A pressure wash and fresh paint only give you a used forklift with a nicer finish. The label on the listing matters too, because many dealers sell refurbished and non-refurbished units side by side.

What Is a Forklift Refurbishment, and How Is It Different From a Used Forklift?

A forklift refurbishment is a documented rebuild. The machine is torn down, inspected, repaired with new parts where wear is found, and tested before sale.

A used forklift is sold in whatever condition it's in, with or without any of that work. Some used units are a fair deal for the price. The trouble starts when a seller calls a cleaned-up machine "refurbished" and the buyer pays for work that never happened.

Refurbished and reconditioned mean the same thing, while detailed or serviced does not. Paint can hide leaking seals and stretched chains, so the label only means something when the paperwork backs it up. For a deeper side-by-side, read our guide to used vs. refurbished forklifts.

What Are the Steps in the Forklift Refurbishment Process?

A complete forklift refurbishment process runs in three stages, in order. Each stage depends on the one before it, so skipping the teardown turns every repair into guesswork.

Stage 1: Teardown Inspection and Diagnosis

The machine is torn down and evaluated top to bottom before any repair begins. Technicians check the hydraulics, mast, drivetrain, electrical system, and safety systems.

Findings go on a standardized checklist, so the same points get checked on every machine. That written record becomes the repair plan. Later, it becomes your proof of what was found.

Stage 2: Rebuild and Component Replacement

Worn parts are replaced, not patched, because a patched seal is a leak waiting to come back.

Common replacements include hydraulic seals and fluid, mast chains and rollers, tires, and brake components. Propane and diesel units often get new engine belts and filters, and electric units may get new battery cells or packs. The shop should keep a parts list on file for each machine.

Stage 3: Load Testing and Final Prep

The unit is driven and load-tested under real working conditions. This is where problems show up that a static inspection misses, like a mast that drifts under weight or brakes that fade.

Paint prep follows. The old finish is stripped where needed, then the frame is primed and coated. Before the unit ships, the buyer should receive the full documentation and photos of the actual machine.

What Gets Inspected and Replaced in a Forklift Refurbishment?

Every major system gets checked, and parts are replaced based on the wear the inspection finds. Use this table as a question list when you talk to any seller.

System What gets checked What typically gets replaced
Hydraulics Cylinders, hoses, pump, and fittings for leaks and drift Seals, hoses, hydraulic fluid, filters
Mast and chains Chain stretch, roller wear, channel wear, carriage play Mast chains, rollers
Drivetrain Transmission or drive unit operation, axle noise, leaks Seals, fluids, worn drive components
Brakes and steering Stopping response, pedal feel, steering play Brake components, worn steering parts
Engine (propane, diesel, gas) Starting, running, cooling, fuel system Belts, filters, hoses
Electric motor and controls Motor operation, controller faults, wiring, contactors Worn wiring, contactors
Battery and charger Cell condition, voltage under load, connectors Battery cells or packs
Tires Tread wear, chunking, separation, correct tire type Tires
Safety systems Horn, lights, backup alarm, seat belt, overhead guard Missing or failed components
Paint and finish Rust, body damage, worn coating Stripped, primed, and recoated

The right-hand column shows typical replacements. Ask the seller which items were actually replaced on the unit you're considering.

How Does Refurbishment Differ for Electric and Propane Forklifts?

The stages are the same, but the focus shifts with the power source. Electric units center on the battery, motor, controller, and charger, while propane units center on the engine and fuel system.

Electric Forklifts

On an electric unit, the battery is the first thing to ask about. Tested, reconditioned, replaced, and untested batteries are different things, and the paperwork should say which one you're getting. A seller should only call a battery tested or reconditioned when there's a record to prove it.

The motor and controller get checked for faults, and the wiring and contactors for wear. Confirm the charger matches the battery and your building's power supply. You can compare options in our electric forklifts collection.

Propane Forklifts

On a propane unit, the engine and fuel system get most of the attention. Belts and filters are common replacements, and the fuel system is checked for leaks and proper operation. Diesel units follow a similar engine-focused path.

If you plan to run a propane unit indoors, check your building's ventilation and site rules first. Browse our propane forklifts to see what's available by capacity and configuration.

Refurbished, Wholesale, Rent-Ready, or As-Is: Which Condition Are You Buying?

Only units sold as refurbished go through the full refurbishment process. At LiftWorks USA, Wholesale, Rent-Ready, and As-Is units do not receive the complete process unless the final sales agreement states otherwise.

Condition label Full refurbishment process Warranty Usually a fit for
Refurbished Yes, all three stages 120-day parts and labor warranty Buyers who want a documented rebuild
Wholesale No, unless the sales agreement states otherwise Confirm in your written quote Buyers comfortable with described condition at a lower price
Rent-Ready No, unless the sales agreement states otherwise None, or shorter than refurbished Buyers who accept limited coverage
As-Is No, and not tested Confirm in your written quote Dealers or buyers on a tight budget

Each of these labels has a place. If you have your own shop and technicians, a wholesale or as-is unit may be the smarter buy. The mistake is paying for one condition and assuming you got another, so confirm the label in your written quote.

What Documentation Should Come With a Refurbished Forklift?

You should get a written record of what was found and replaced, plus proof of load testing. If a seller can't produce it, treat the machine as used until proven otherwise.

Ask for these documents on any unit sold as refurbished:

  • The completed inspection checklist from the teardown
  • A parts list naming every component replaced during the rebuild
  • Confirmation that the unit was driven and load-tested
  • Battery records on electric units, stating whether the battery was tested, reconditioned, replaced, or left untested
  • Photos of your actual unit before it ships
  • A written quote stating the condition label and warranty terms

Keep these papers with the machine. Your maintenance team will use them, and they matter if you file a warranty claim or trade the unit in later.

How Can You Verify a Seller's Refurbishment Claims?

Ask specific questions and expect specific answers. A seller who actually rebuilt the machine can name the parts replaced on that exact unit.

  • Was this unit torn down, or only serviced and painted?
  • Can I see the inspection checklist and parts list for this serial number?
  • Was it load-tested, and what did the test cover?
  • Was the battery tested, reconditioned, replaced, or left untested?
  • What condition label is on the listing, and will the sales agreement state it?
  • What does the warranty cover, and is it in writing?

Vague answers like "it's been gone through" are a warning sign. Pair these questions with our used forklift buying checklist when you inspect a unit in person or over a video call.

How Does LiftWorks USA Refurbish and Deliver Forklifts?

LiftWorks USA runs every machine purchased with the refurbishment package through the three stages described above. Refurbished equipment is the core of the business, so the process is documented on each refurbished unit.

The Rebuild

Each unit sold as refurbished is torn down and logged on a standardized checklist before repairs begin. Worn parts are replaced instead of patched, and the parts list stays on file. The unit is then driven and load-tested before paint.

Warranty and Quotes

Units sold as refurbished come with a 120-day parts and labor warranty, and that warranty applies to refurbished units only. Terms can differ by unit, so your written quote states the exact coverage. Quotes usually come back in about 15 minutes, and the team verifies condition and availability before quoting.

Shipping, Financing, and Trade-Ins

You get photos of your actual unit before it's dispatched. Freight is available to all 48 states, and export crating is available for international buyers. Delivery timing is confirmed in your written quote.

Financing is available, and trade-ins are accepted if you're replacing an older machine. If your loads fit the class, look at our 5,000 lb forklifts, and confirm capacity at your load center and lift height before you buy. To see how the team works with buyers, read what makes the LiftWorks USA process different.

Frequently Asked Questions

What is included in a forklift refurbishment?

A forklift refurbishment includes a teardown inspection and replacement of worn parts, followed by a documented load test. Technicians check every major system, then replace worn seals, chains, rollers, tires, filters, and brake parts before paint. Ask for the inspection checklist and parts list so you can see exactly what was done on your unit.

What is the difference between a used and a refurbished forklift?

A refurbished forklift has been torn down, inspected, repaired with replacement parts where wear was found, and tested before sale. A used forklift is sold in its current condition, which may or may not include repair work. The real difference is documentation, because a refurbished unit should come with records of the inspection and the parts replaced.

Is a refurbished forklift worth it?

A refurbished forklift is worth it when you need a dependable machine and don't have a shop to rebuild one yourself. You pay for the teardown, replacement parts, and testing up front instead of finding repairs after delivery. If you have in-house technicians and want the lowest purchase price, a wholesale or as-is unit may fit your operation better.

Do refurbished forklifts come with a warranty?

At LiftWorks USA, units sold as refurbished come with a 120-day parts and labor warranty. Wholesale, Rent-Ready, and As-Is units are not covered by that warranty, and Rent-Ready units carry no warranty or a shorter one. Terms can differ by unit, so your written quote states the exact coverage.

Are all used forklifts refurbished?

No, many used forklifts are sold without any rebuild, and some dealers sell refurbished and non-refurbished units side by side. At LiftWorks USA, Wholesale, Rent-Ready, and As-Is units do not receive the complete refurbishment process unless the final sales agreement states otherwise. Check the condition label on the listing, then confirm it in the written quote before you buy.

What should I ask before buying a refurbished forklift?

Ask to see the inspection checklist, the parts list, and proof of load testing for that specific unit. On electric models, ask whether the battery was tested, reconditioned, replaced, or left untested. Confirm the condition label and warranty terms in writing, and request photos of the actual machine before it ships.

Get a Refurbished Forklift That's Ready to Work

A forklift refurbishment process is only as good as the records behind it. Before you buy, confirm the condition label and ask for the checklist and parts list. Get the warranty terms in writing too.

  • Refurbished means torn down, inspected, rebuilt with replacement parts, and load-tested
  • Documentation is your proof, so ask for it on every unit
  • Only units sold as refurbished get the full process at LiftWorks USA
  • The 120-day parts and labor warranty applies to refurbished units only

Browse our current forklift inventory, then call 805-601-7081 or request a quote. We'll verify the condition report, availability, configuration, and warranty terms, then put the complete details in a written quote.

Explore More Forklift Guides

Browse all guides in our Forklift Insider blog, or explore available forklifts.