Crown and Raymond both build proven stand-up electric reach trucks, so the badge alone won't settle this. In a Crown vs Raymond reach truck decision, pick the unit that fits your aisles, rack height, operators and budget for condition. LiftWorks USA sells used and refurbished reach trucks from both brands, so we have no reason to push one over the other.
What Is the Difference Between Crown and Raymond Reach Trucks?
The biggest differences show up in how each truck feels to the operator, mostly the control handle and the operator compartment. Both brands do the same job: placing pallets into narrow-aisle racking with a stand-up electric truck.
Controls and Operator Compartment
Each brand has its own control handle layout and its own way of positioning the operator. Someone who has run one brand for years will notice the change on the first shift. Neither layout is wrong, but your team will have a preference, and that preference affects how fast they work.
The simplest test is a test drive. Have your most experienced operator run the controls on each truck and check the view through the mast to the forks.
Mast and Visibility
Mast design affects what the operator sees when placing a load at height. Mast design varies by model and year on both brands. Raise the mast on the specific unit and judge visibility from the operator's position.
Model Families on the Used Market
On the Raymond side, buyers most often search for the 750 and 752 R45TT reach trucks. You can see current listings of Raymond forklifts and reach trucks to compare what is available now.
On the Crown side, the RR5725 (from the RR 5700 series) and the RM6025 (from the RM 6000 series) are common. Browse Crown forklifts and reach trucks for current units.
A model number tells you the truck family. Mast and battery configuration vary from unit to unit, so confirm them on the data plate and in the written quote.
Crown vs Raymond Reach Truck Comparison Table
The table compares the two brands on the points buyers ask about most. It describes general tendencies, so verify every point on the specific unit you are considering.
| Factor | Crown | Raymond |
|---|---|---|
| Operator position | Stand-up compartment; layout varies by series | Stand-up compartment; layout varies by model |
| Controls | Crown's own handle layout; Raymond-trained operators need time to adjust | Raymond's own handle layout; Crown-trained operators need time to adjust |
| Common used models | RR5725, RM6025 | 750 and 752 R45TT |
| Single and double reach | Both exist in the lineup; confirm which one the unit is | Both exist in the lineup; confirm which one the unit is |
| Best fit | Fleets already running Crown, or teams that prefer Crown controls after a test drive | Fleets already running Raymond, or teams that prefer Raymond controls after a test drive |
| Parts and service | Crown-specific parts; check service support in your area | Raymond-specific parts; check service support in your area |
| What to verify on a used unit | Mast, chains, hydraulics and battery documentation | Mast, chains, hydraulics and battery documentation |
Which Reach Truck Is Better for Narrow Aisles and High Racks?
Both brands are built for narrow aisles and high racking, so the better truck is the one whose configuration matches your building. Measure first, then shop.
Measure Aisle Width and Turning Space
Measure the aisle from rack face to rack face at its narrowest point. If pallets overhang the beams, measure from load to load instead.
Never assume a truck fits based on its width alone. Turning space depends on the truck's overall length and the size of your load, so ask for the right-angle stacking requirement for the exact unit.
Match Lift Height to Your Top Beam
Measure the height of your top beam, then allow clearance to lift a pallet over it. You also need the lowered mast height so the truck clears doorways and overhead obstructions.
Rated capacity changes with lift height and load center. Read the capacity plate for the figure at your top beam height before you commit.
For mid-height racking, start with forklifts with 300 to 400 inch lift height. For taller buildings, look at forklifts over 400 inch lift height.
Single Reach or Double Reach
A single reach truck handles pallets stored one deep. A double reach (deep reach) truck extends further to reach a second pallet stored behind the first, which suits double-deep racking.
Both Crown and Raymond offer double reach versions as a separate configuration. Confirm the reach style on the data plate before you compare units against your racks.
How Do Operators Adjust When Switching Brands?
Operators can switch, but expect a learning curve because the controls are laid out differently. Plan retraining time, and keep one brand per work area when you can.
A reach truck operator builds habits around where each function sits on the handle. Put that operator on a different brand and those habits slow them down, at least at first.
That is why fleet familiarity often decides the question. If your team already runs Raymond, a used Raymond usually means less disruption, and the same logic applies to a Crown fleet.
Mixing brands still makes sense when the right unit is available in the right condition. If you go that route, assign trucks by area or shift and retrain before the truck goes into production.
Operators must complete employer-provided training on the specific truck before running it. This guide is buying advice and does not replace that training.
What About Maintenance, Parts and Batteries?
Expect parts to be brand-specific, so a Crown and a Raymond generally use different service parts. Batteries and chargers must match each truck's voltage and battery compartment.
Parts and Service Support
Before you buy, ask your service provider which brand they support well in your area. A truck is only as useful as the technician who can keep it running.
Running a single brand keeps your parts shelf simpler. Running both means stocking two sets of wear items and building service knowledge on two platforms.
Battery and Charger Matching
Reach trucks are electric, so the battery is a big part of what you are buying. Check the battery voltage and compartment size, and make sure your existing chargers match.
Ask how the battery has been checked and whether that check is documented. A tested battery and an untested one are very different purchases.
If you are standardizing on battery power across the fleet, compare other electric forklifts that could share your charging setup when the voltage matches.
Should You Buy a Used Crown or Raymond Reach Truck?
Either brand is a sound used purchase when the specific unit is in good condition and fits your building. Focus on the condition tier and the inspection results first.
If you are still deciding on the machine type, read what a reach truck is and when you need one. If your team picks individual cases at height, compare order picker vs reach truck before you commit.
Understand the Condition Tier
LiftWorks sells reach trucks in four condition tiers, and each one is a different purchase. Refurbished units are rebuilt and tested through the LiftWorks refurbishment process. They come with a 120-day parts and labor warranty on refurbished equipment.
Wholesale, Rent-Ready and As-Is units do not receive the complete refurbishment process unless the final sales agreement states otherwise. The 120-day warranty does not apply to them. They suit buyers with in-house mechanics or a tighter budget.
Your written quote confirms the condition tier and warranty terms for the exact unit.
What to Inspect on Any Used Reach Truck
Whichever brand you choose, check these points on the specific truck:
- Check the mast for smooth travel and the chains for wear and stretch.
- Look for hydraulic leaks at the lift cylinders and the reach mechanism.
- Run the reach function at height with a load on the forks.
- Ask for battery documentation and confirm the voltage matches your chargers.
- Read the data plate to confirm the model and its configuration.
- Inspect the drive tire and load wheels for flat spots and chunking.
- Test the brakes and steering while listening for drive unit noise.
How LiftWorks USA Helps You Choose Between Crown and Raymond
We sell both brands, so we can put a Crown and a Raymond side by side and let your building decide. Our reach truck inventory is heavy on Raymond R45TT models and the Crown RR5725 and RM6025.
Send us your top beam height, lowered height limits, aisle width and pallet size. We'll match them to specific units and tell you plainly when a different truck type fits your job better.
We verify the condition report and availability before we quote, and most quotes come back in about 15 minutes. We offer freight to all 48 states and export crating for international buyers, with shipping timing confirmed in your written quote.
Financing is available, and we accept trade-ins if you are retiring older trucks. Browse our used reach trucks for sale to compare current Crown and Raymond units.
Frequently Asked Questions
Is Crown or Raymond better for reach trucks?
Neither brand is better for every warehouse. Both build proven stand-up electric reach trucks. The better choice is the unit that fits your aisle width and top beam height, from the brand your operators already know. On a used truck, condition matters more than the badge, so compare the condition tier and inspection results for each specific unit before you decide.
Are Crown and Raymond reach truck parts interchangeable?
Generally, no. Crown and Raymond reach trucks use brand-specific service parts, even where the trucks do similar jobs. Batteries are a separate question. A battery only works in another truck when its voltage and size match that truck's compartment, so confirm both before swapping. Running one brand keeps your parts shelf simpler and makes service easier to plan.
Can operators switch from a Raymond to a Crown reach truck easily?
Operators can switch, but expect a learning curve. Each brand lays out its controls differently, and experienced operators rely on habit. Plan retraining time before the truck goes into production, and keep one brand per area or shift where you can. Operators must complete employer-provided training on the specific truck before running it.
Should I buy a used Crown or a used Raymond reach truck?
Buy whichever specific unit is in better condition and fits your building. If your fleet already runs one brand, staying with it usually means easier operator training and simpler parts. Beyond that, compare the condition tier and the inspection results, then confirm the truck fits your aisles and racking. Ask for a written quote that confirms condition and warranty terms.
Is a refurbished reach truck worth it?
A refurbished reach truck is worth it when you want lower risk than a wholesale or as-is unit. At LiftWorks, refurbished units are rebuilt and tested through our refurbishment process and carry a 120-day parts and labor warranty. Wholesale, Rent-Ready and As-Is units do not receive the complete refurbishment process unless the final sales agreement states otherwise.
What should I measure before buying a reach truck?
Measure your top beam height, the lowered mast height your doorways allow, your aisle width at its narrowest point and your pallet size. Also check your charger voltage. Share those measurements with the dealer so they can match them to a specific unit's data plate. A truck's width or mast height alone does not tell you whether it will fit.
Find the Right Crown or Raymond Reach Truck
Crown and Raymond both make reach trucks worth owning. The right one for your warehouse comes down to your measurements and the condition of the specific unit.
Key Takeaways
- Measure your aisles and top beam height before you compare brands.
- Stay with the brand your operators know when the right unit is available.
- Treat parts as brand-specific, and match batteries to your chargers.
- Choose refurbished when you want the 120-day parts and labor warranty.
Call 805-601-7081 or request a quote for a Crown or Raymond reach truck and include your measurements. We'll verify the condition report, availability, configuration and warranty terms, then put the complete details in a written quote.
Explore More Forklift Guides
Browse all guides in our Forklift Insider blog, or explore available forklifts.